Address

Author Topic: Laser cutter  (Read 674 times)

Simply7

  • FamiLAB Member
  • Hero Member
  • *
  • Posts: 547
    • View Profile
Laser cutter
« on: August 14, 2012, 12:21:14 PM »
I was experimenting with the laser cutter last night making cuts with an angle and forgot to remove the parts I used to lift the cutter bed. There are two pieces of acrylic under the aluminum 'burn plate'.  Please remove if you are going to use the.cutter.

I`ll try to.swing by after work and remove the pieces.